Basic Info.
Type
Calibration of Gastric Tube
Material
Medical Grade Silicone
Ethylene Oxide Sterilization
Ethylene Oxide Sterilization
Quality Guarantee Period
Two Years
Logo Printing
With Logo Printing
Certification
CE/ISO13485
Usage
Operation Room, Emergency Room, ICU
Safety Standard
En 149 -2001+A1-2009
Transport Package
OPP Bag or as Requirements
Product Description
Product Description
Instructions
The Calibration TUBE is introduced orally until it reaches the positioning site. Once the gastric pouch has been completed, a leak test can be performed. For this purpose, a syringe is connected using the universal connector and air or liquid is introduced into the stomach segment. The tube can be closed as required using the tube closure clip. Following completion of the leak test, the liquid is aspirated via the holes in the gastric calibration tube.
POSSIBLE COMPLICATIONS / RISKS
• Oesophageal perforation
• Stapling over the gastric tube when using stapling instruments
Name | Gastric Calibration Tube |
Model specifications | I Type: 32Fr ,34Fr ,36Fr ,38Fr ,40Fr Without balloon II Type: 32Fr ,34Fr ,36Fr ,38Fr ,40Fr With balloon |
Origin | Suzhou,China |
Printing words | Customized |
Material | Medical Silicone |
Length | 1000/1200mm or Customized |
Color | Red, blue, yellow or customization |
Surface | Smooth |
Package | Sterilized Sealed Package or Customized Package |
Delivery Time | Shipped out within 1-7 days after receiving PO and payment(for new customer). |
Freight | Sea (FCL & LCL) or air freight |
Feature | 1.Made of 100% medical grade silicone. 2.Open distal end with 6 side holes. 3.Closed distal end is available. 4.Available with different length. 5.Single-use, convenient and safe. 6.Cap-cone connector/ENFIT connector. |
Recommendations | 1.The gastric calibration tube should not be used for more than two hours. 2.The maximum volume injected into the balloon is 60 ml. 3.Do not inflate the balloon before it reaches the stomach. 4.The inflation valve is a fragile part and needs to be handled with care. 5.At least one spare uncalibrated tube must be kept in case of failure or other events 6.The balloon must be inflated gradually under visual inspection by the user. |
Detailed Photos
Photo Show
Certifications
Company Profile
Suzhou Siweier Plastics Technology Co. Ltd. Is located in Suzhou, close to Shanghai, with a superior location and convenient transportation. The company was established in August 2009, covering an actual area of 14, 169 square meters. The company has formed a characteristic image of "complete specifications, many varieties, large quantities, fast delivery and high quality".
The main products include medical consumables, Silicone tubes, FEP / PFA Tube, Silicone Braided Hose, Pump Hose, PVC Hose, Silicone Products, Silicone Shaped Parts and so on.Through the efforts of all staff, the company has obtained ISO9001, ISO13485 management system certificate, IATF16949 automotive quality system certification, EU CE certificate, US FDA certificate and many other authoritative certifications.
The company has strong technical force, strong innovation and research ability, and can customize different specifications of products according to customer needs. We insist on the principle of "customer first, honesty and trustworthiness" to provide our customers with high quality products and attentive service.
FAQ
Q1: Do you have your own factory?
A:Yes, we have our own factory established more than 12 years.
Q2: Silicone seems to be more expensive than other rubber, why is this?
A: Silicone is more expensive than most rubber types because it is a speciality high performance polymer with outstanding qualities. It is made in relatively low quantities and requires expensive and complicated primary manufacturing facilities.
Q3: What is the difference between 'curing' and 'vulcanization'?
A: The terms curing and vulcanization essentially describe the same thing - the transformation of the polymer into a cross-linked rubber.
Q4: Why is silicone used in food applications?
A: Silicone rubber is among a number of rubber types that can be used in contact with food. It has the advantage of being a low taint non-toxic material.
Q5: Do you provide sample? Is it for free or not?
A: Yes, if we have it in stock we can offer the sample for free , you need to pay for the freight cost to your country. The sample will be sent immediately by the air express in 3- 5 dayswhile .
Q6: When can you launch delivery after I placed order?
A: If there is stock, 2-5 days; if not, 15-30 days depends on the quantity.
Q7: Do you Accept OEM service?
A: YES, We can provide OEM&ODM service.
Q8:What's the Payment Terms?
A: Usually,30% as deposit,70% before shipment by T/T
Western Union acceptable for small amount. L/C acceptable for large amount. Scrow ,Paybal,Alipay are also ok
Q9:How you pack products?
A:Normally,plastic bag inside and carton outside .We'll do according to customers' requirement.
Q10: Where is your factory located? How can I visit there?
A: Our factory is located in Suzhou City, Jiangsu Province, China.
It's takes 1.5 hours from Shanghai airport. We can pick you up if you need, welcome to visit our factory.
Q11: I am a small wholesaler,do you accept small order?
A: We can accept small order or trial order as long as it meets our MOQ and we would like to grow up with you together.
Address:
5 Mulin Road, Wangshan Industrial Park, Yuexi Street, Wuzhong District, Suzhou, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Agriculture & Food, Auto, Motorcycle Parts & Accessories, Computer Products, Electrical & Electronics, Health & Medicine, Industrial Equipment & Components, Light Industry & Daily Use, Manufacturing & Processing Machinery, Tools & Hardware, Transportation
Management System Certification:
ISO 9001, IATF16949, ISO 13485
Company Introduction:
Suzhou Siweier Plastics Technology Co. Ltd. Is located in Suzhou, close to Shanghai, with a superior location and convenient transportation. The company was established in August 2009, covering an actual area of 14, 169 square meters, with a total plant area of 11, 000 square meters, including a 100, 000-class purification workshop covering 4, 000 square meters. With a total of 50 production lines and an annual productivity of more than 23, 000 tons, the company has formed a characteristic image of "complete specifications, many varieties, large quantities, fast delivery and high quality".
The main products include medical consumables, Silicone tubes, FEP / PFA Tube, Silicone Braided Hose, Pump Hose, PVC Hose, Silicone Products, Silicone Shaped Parts and so on.
Through the efforts of all staff, the company has obtained ISO9001, ISO13485 management system certificate, IATF16949 automotive quality system certification, EU CE certificate, US FDA certificate and many other authoritative certifications.
The company has strong technical force, strong innovation and research ability, and can customize different specifications of products according to customer needs. We insist on the principle of "customer first, honesty and trustworthiness" to provide our customers with high quality products and attentive service.